भारत सरकारGovernment of India

NewSpace India Limited

Technology Transfer

Technology transfer is the process by which knowledge acquired by an entity while developing a particular technology is transferred to external entity including public and private sector, academia, State and Central Government organization, etc.

Published on: Last updated: 3 views

Share this page

Technology transfer is the process by which knowledge acquired by an entity while developing a particular technology is transferred to external entity including public and private sector, academia, State and Central Government organization, etc.

NSIL and IN-SPACe have been mandated to transfer the technologies developed by DOS/ISRO centres/units so that benefits of the space programme are transferred to Indian Industries thereby contributing towards technological self-reliance, industrial growth and national development.

Department of Space has authorised NSIL to enter into Technology Transfer Agreement with suitable entrepreneurs/ Industry in India.

The Technology Transfer Process is given here below:

I) Submission of Technology Transfer (TT) Request through IN-SPACe portal. Link is given below:

(https://www.inspace.gov.in/inspace?id=inspace_nge_proposal_page&sys_id=4e0bb01f873 89150cc8310aabbbb352d)

II) Evaluation of company profile and technical capabilities by IN-SPACe

III) Signing of TT Agreement with NSIL & IN-SPACe

IV) Remittance of TT Fee to NSIL

V) Handholding for technology transfer by ISRO

Thefollowing technologies are available for transfer to Industries.

S No. Technology Name
1 Antennas
1.1. C band Active Radar Calibrator
1.2 Compact L5 Band Ceramic Antenna
1.3 Design Of Ku/C/L and S Band Cassegrain Feed
1.4 Design of 6 port Ku-band Tx/Rx LP Monopulse feed for TT&C Operations
1.5 Dual feed Square patch antenna for Broadcast receiver
1.6 Dual feed Square Patch antenna for Reporting Terminal
1.7 Dual Polarized, S&X Band Mono Pulse Feed for Tracking LEO Satellites
1.8 Ground Peneration Radar (GPR)
1.9 Ka Band 5W Solid State Power Amplifier
1.10 L-Band True Time Delay Phase Shifter
1.11 Multilayer Printed Antenna Technology
1.12 Patch Array Antenna for Portable Multimedia Terminal
1.13 S/X/Ka Tri-Band Feed
1.14 X band Wide scan Active Phased Array Antenna
2 Communication & Navigation
2.1 Advanced High Data Rate Modulator
2.2 Design & Development of FPGA based Digital Demodulator
2.3 Distress Alert Transmitter (DAT-SG)
2.4 Low Cost Multi Standard Satellite Receiver (Data DTH) Technology
2.5 Low Noise Amplifiers (LNAs) and RF Amplifiers for GNSS & VHF bands
2.6 Mobile Satellite Services Terminal - Broadcost Receiver
2.7 Mobile Satellite Services Terminal - Portable Multimedia terminal
2.8 Mobile Satellite Services Terminal - Reporting Terminal
2.9 Mobile Satellite Services Terminal - Satellite Mobile Radio
2.10 Navl Based RTK System and comprising sub-system of : (UHF Radio, RTK processing Software , High Gain Rover Active Antenna)
2.11 Navic Messaging and Positioning Receiver
2.12 Personnel Tracker
2.13 Pseudo lite Based Navigation System
2.14 Radiosonde
2.15 Rapidly Deployable Multi-band VSAT Terminal for Disaster Management
2.16 Two Way MSS Terminal for Vessel Tracking
2.17 Two Way s-band data (MSS) Terminal
2.18 Two-Channel Digital Monopulse Tracking Receiver for Earth Station
2.19 V Band Low Noise Amplifier
3 RF & Electronics
3.1 Burst Demodulator IP Core
3.2 Battery Charge Regulator (BCR)
3.3 Battery Discharge Regulator
3.4 Ceramic Servo Accelerometer (CSA)
3.5 CV-CC solar array simulator for 420/70V BUS
3.6 c/Ku Ortho Mode Transducer for combined c/Ku Receive Feed Systems Ferrite based Wave
3.7 Differential Pressure Transducer (DPT)
3.8 DVD-RCS to DVB S2 Onboard Processing Payload
3.9 Electronic Safety Handheld Ohmmeter (ESHO)
3.10 E-plane Filter
3.11 Eddy Current Damper
3.12 Electronic Safety Handheld Ohmmeter (ESHO 4.5)
3.13 Evanescent Mode Filters
3.14 Fine line PCB Technology for Fine-pitch surface Mount Devices
3.15 Ferrite based Wave guide Circulators and Isolators
3.16 Guide Circulators and Isolators
3.17 Gold Plated PTH/ Non PTH PCBs
3.18 Ground Penetrating Radar
3.19 Highly Accelerated Thermal Shock (HATS) System for Assessment of PCB via Reliability
3.20 High Power Circulator-Switch Assembly
3.21 Highly Accelerated Thermal Shock (HATS) System for Assessment of PCB via Reliability
3.22 HMC 30W DC-DC Converter
3.23 HMC DC-DC Converters (30W)
3.24 IDLV Pressure Transducer
3.25 MEMS based Pressure Transducer
3.26 Microwave Data Analysis Software (MIDAS)
3.27 MEMS Acoustic Sensor
3.28 Miniaturised High Frequency DC DC Converter
3.29 PTS-84 Temperature Sensor
3.30 Piezo-Electric Vibration Sensor (PEVS)
3.31 Portable Bathymetry profiler System
3.32 Rigid-flex Multilayer PCB Technology
3.33 RF Design of Ku-band 6-port Tx-Rx Monopulse Feed System
3.34 Ribbon Stack Heat Flux Sensor
3.35 SCPC Modem IP Core
3.36 Supercapacitors
3.37 Solid State Recorder
3.38 TCP-84 Temperature Sensor
3.39 TRISP (Triple Input Smart Power Supply)
3.40 Thermal Sensors and Heat Flux Sensor
3.41 Ultrasonic Burning Rate Measurement System (UBRMS)
3.42 Ultrasonic Liquid Level sensor (USLS)
3.43 15W C Band Solid State Power Amplifier
3.44 21 NA Pressure Transducer
4 Remote Sensing
4.1 Algorithm for detecting Mineral-Limestone
4.2 Cal- Val Systems for Spaceborne Ocean Colour Sensors
4.3 Detection of Landslides from High Resolution Optical Satallite Data
4.4 MiniSAR: X band Airborne SAR
4.5 Photosynthesis Irradiance Incubator
5 Process
5.1 Anodising on Titanium Alloys
5.2 Black Anodizing On Aluminium 6061T6 & Chromating Technology
5.3 Ceramic foam (HTFOAM-1500) by Direct Foaming Technique
5.4 Corrosion Resistant Coating NRCM-204
5.5 Cr-Cu-Au metallisation for Hi-Rel MIC fabrication
5.6 Chemical formulation of stable, low build electroless copper concentrate for PTH interconnections
5.7 Electroless Nickel Electroless Palladium Immersion Gold (ENEPIG) Process for Printed Circuit Boards
5.8 Flameproofing Coating-Caspol
5.9 Gold Plating on Aluminium 6061 T6 and Kovar
5.10 Methods and system to control the data processing workflows in distributed environment with asynchro
5.11 Nano-Structured Metal Deposition by Electroplating Method for PCB required for Space Application
5.12 Nanoparticle (Silver & Gold) Coating on Aluminium
5.13 Power Conditioning and Processing Unit
5.14 Pulse Hard Anodising
5.15 Pulse Hard Anodization Process
5.16 Smart Fire-Retardant Coating
5.17 Silicone Polymer Based Thermal Protection system: PC-10 TPS
5.18 Silver Plated Waveguides Technology
5.19 Thermal Control Coating Technology
5.20 High Emissive silicon coating HESC/CSNM-29
6 Mechanical and Pneumatics
6.1 D-Type Connector De-Mating Tool
6.2 Fabrication of Waveguide Runs
6.3 Precision Tapping Attachment
6.4 Piezo Electric Vibration Sensor
6.5 Tool For Connector Pin & Teflon Trimming
6.6 Umbilical Pads
6.7 Vibration Management Solutions
6.8 Sit on Umbilicals for Remote Fluid Servicing of Launch
7 Optics
7.1 Active 3D Imaging Lidar Camera
7.2 Miniaturized Methane Sensor based on GRIN Lens
7.3 Optical Imaging System
8 Material & Chemicals
8.1 Adbond EPP- 3521
8.2 BMT Ceramics
8.3 Benzoxazine Polymer
8.4 Compensated Alumina (ComAl) for Electronic Applications
8.5 Coating Compound EPY 1061
8.6 Cryo Adhesive EPIFIL-9661
8.7 Ceramic Foam (HTFOAM-1500) by Direct Foaming Technique
8.8 DK 65
8.9 DK-18 Ceramics
8.10 DK65 Ceramic for Microwave Applications
8.11 Film Adhesives EFA 1753 and EFA-1752
8.12 EPG 2601[M]
8.13 FB-CVI for realisation of C-C Composite
8.14 Guanidinium Azotetrazolate (GZT)
8.15 High Density Sintered Silicon Carbie
8.16 High Emissive Silicone Coating, HESC/ CSNM-29
8.17 High-Permittivity Ceramic (DK36) for R F Applications
8.18 HLP-85 Temperature Sensor
8.19 Hot pressed BN/ Sintered parts
8.20 Hot pressed/Silica Composites
8.21 Low Modulus Flex Seal Rubber Compound
8.22 Lithium Ion Cells
8.23 Low Density EPDM Based Thermal Insulation
8.24 Low Modulus Flex Seal Compound
8.25 Matrix resin for composite application EPY PEEKTOH
8.26 Mineral Algorithm
8.27 NITI Based Shape Memory Alloy
8.28 Nitinol Based Shape Memory Alloys
8.29 Phenolic Matrix Resin (PF-108)
8.30 Phenolic Resin (PF-106)
8.31 Polydimethylsilane (PDMS)
8.32 Paraffin Actuator Based HDRM
8.33 Rocasin
8.34 RTV Silicone Single Part Adhesive, Silcem R9
8.35 SiC Foam Tile SICTILE-1650 by Replica Technique
8.36 Silica Aerogel Based Composite Sheet
8.37 Silica Aerogel By Ambient Pressure Drying Method
8.38 Silica Fibres
8.39 Silica Granules
8.40 Silicone Polymer Based Low Density Syntactic Foam TPS, SSF P-70
8.41 Strontium Perchlorate
8.42 SCA-911
8.43 Sealant EPY 2121N
8.44 Silicone Polymer based Thermal Protection System: PC- 10 TPS (Red) and (White)
8.45 Supercapattery
8.46 Waterproofing Compound RWPC-03
8.47 5- Aminoterazole Nitrate
9 Satellite / Sub-systems
9.1 Ceramic Servo Accelerometer
9.2 CFRB Honeycomb Core
9.3 Foil Heaters using Pyralux Adhesive
9.4 Heat pipe Honeycomb sandwich panel /special tooling process
9.5 ISRO Laser Gyro (ILG-300)
9.6 Indian Mini Satellite-1 (IMS-1) Bus
9.7 ISRO-DEEP Learning (DL) Satellite Data Synthesis
9.8 Integrated Tracking System for Satellite Auto Track
9.9 Monolithic composite cylindrical sandwich cells process
9.10 RF Rotary Joint
9.11 Special purpose picture for assembly and integration of space craft
9.12 Satellite Gateway Unit (SGU)
10 Software
10.1 E-smart Software
10.2 I-SCADA (no documents)
10.3 Model Source Codes for sugarcane Crop identification (no documents)
10.4 SAC Video Imaging System (SVIS)

Related documents

Demo

This is a demonstration

A working preview of the proposed NSIL website and content management system, built for tender evaluation. Content is sourced from the current nsilindia.co.in for demonstration only. Data resets periodically.

Sign in to the CMS with any of these accounts

RoleUsernamePassword
AdministratoradminNsil@Demo2026
Content creatorcreatorNsil@Demo2026
Content approverapproverNsil@Demo2026
ViewerviewerNsil@Demo2026
Open the CMSView as a visitor in India